On orders placed before midnight this Sunday (5/20/2012) (Free shipping for lower 48 US only)
|
  |
|
| |
|
TiteBike Cruiser Windshields - Suzuki
TiteBike recommends the following products to polish their windscreens: Plexus; Novus 123 (1 clean, 2 scratches, 3 minor scratches); Meguiar's mirror glaze #17, Brilliamize.
 |
| TiteBike Windshield - SUZUKI AN400 BURGMAN 2003 - 2006 Item #: SUZ01010 |
$175.95
|
OEM Measurements 26" Height, 15" Width
TiteBike replacement windshield for SUZUKI AN400 BURGMAN 2003 - 2006 Models follows the same lines and contours as the original Suzuki (OEM) windscreen including a slightly curve at the top for better wind and rain protection. Available in different heights to suit your riding style. TiteBike offers: 24" - 30" Height, 19" Width. Windscreen is wider than the stock original providing the rider excellent body protection. Handcrafted from 0.187 (3/16") thick cast military aircraft grade acrylic, specified for optical clarity. Available in Clear and Light Gray. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. All holes are CNC drilled to match the factory specifications. Height is measured from nose along the center line of the windshield and width near the top. |
|
 |
| TiteBike Windshield - SUZUKI AN650 BURGMAN EXECUTIVE 2005-UP Item #: SUZ01009 |
$165.95
|
OEM Measurements 25" Height, 19" Width
TiteBike replacement windshield for SUZUKI AN650 BURGMAN EXECUTIVE 2005-UP Models follows the same lines and contours as the original Suzuki (OEM) windscreen including a slightly curve at the top for better wind and rain protection. Our windshield provides excellent body protection, is much wider than the original, at 14" up from the middle screw hole measures 24" wide, at the middle measures 21" wide and near the top measures 20" wide. Available in different heights to suit your riding style. TiteBike offers: 23" - 30" Height, 24" Width. Handcrafted from 0.187 (3/1") thick cast military aircraft grade acrylic, specified for optical clarity. Available in Clear and Light Gray. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. All holes are CNC drilled to match the factory specifications. Height is measured along the center line of the windshield and width 14" up approximately from the middle screw hole. |
|
 |
| TiteBike Windshield - SUZUKI BOULEVARD C50 2005-UP Item #: SUZ01001 |
$115.95
|
TiteBike replacement windshield for SUZUKI BOULEVARD C50 2005-UP is available in different heights to suit your riding style. TiteBike offers: 15" - 25" Height, 22" - 25" Width. Handcrafted from 5mm (0.187 = 3/16") thick cast military aircraft grade acrylic, specified for optical clarity and is thicker than the original. Available in clear and light grey tint. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. All holes are CNC drilled to match your original mounting hardware. Height is measured from the top of the headlight cut out to the top of the windshield and width at widest point. Must have OEM hardware. P/N: 990A0-70022.
OEM Measurements 20" Height, 22" Width
NOTE: Windshield does not come with hardware.
|
|
 |
| TiteBike Windshield - SUZUKI BOULEVARD C90 / C90T 2005-UP - LOWER WIND DEFLECTORS Item #: SUZ04002 |
$28.95
|
TiteBike offers replacement Lower Wind Deflectors for SUZUKI BOULEVARD C90 / C90T 2005-UP Models. They really help to reduce the helmet buffeting by directing the wind around you farther out and farther back. Handcrafted from 0.187 (3/16") thick cast military aircraft grade acrylic. Available in Clear and Light Gray. Lowers are manufactured to order. Edges are hand ground and polished.
|
|
 |
| TiteBike Windshield - SUZUKI BOULEVARD C90T 2005-UP Item #: SUZ01002 |
$115.95
|
TiteBike replacement windshield for SUZUKI BOULEVARD C90T 2005-UP is available in different heights to suit your riding style. TiteBike offers: 15" - 26" Height, 23" - 26" Width. Handcrafted from 5mm (0.187 = 3/16") thick cast military aircraft grade acrylic, specified for optical clarity and is thicker than the original. Available in clear and light grey tint. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. All holes are CNC drilled to match your original mounting hardware. Height is measured from the top of the headlight cutout to the top of the windshield and width at widest point.
OEM Measurements 19" Height, 23" Width
NOTE: Windshield does not come with hardware.
|
|
 |
| TiteBike Windshield - SUZUKI BURGMAN (AN400) 2007-UP Item #: SUZ01007 |
$176.95
|
OEM Measurements 26" Height, 19" Width
TiteBike replacement windshield for SUZUKI AN400 BURGMAN 2007 - 2009 Models is available in different heights to suit your riding style. TiteBike offers: 24" - 31" Height, 22" Width. This windshield follows the same contours as the original windscreen, is wider providing the rider excellent body protection. Handcrafted from 0.150 thick cast military aircraft grade acrylic, specified for optical clarity. Available in clear and light grey tint. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. All holes are CNC drilled to match the factory specifications. Height is measured from nose along the center line of the windshield and width near the top.
|
|
 |
| TiteBike Windshield - SUZUKI BURGMAN (AN650) 2003-UP Item #: SUZ01004 |
$145.95
|
OEM Measurements 25" Height, 19" Width
TiteBike replacement windshield for SUZUKI BURGMAN (AN650) 2003 - UP is available in different heights to suit your riding style. TiteBike offers: 23" - 31" Height, 22.5" Width. Shape designed to compliment the lines of the BURGMAN (AN650). Our windshield is wider than the original windscreen, providing the rider excellent body protection. Handcrafted from 5mm (0.187=3/16) thick cast military aircraft grade acrylic, specified for optical clarity. Available in clear and light grey tint. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished to a brilliant luster. All holes are CNC drilled to match the factory specifications. Height is measured along the center line of the windshield and width 14" up approximately from the middle screw hole. |
|
 |
| TiteBike Windshield - SUZUKI VL 1500 LC INTRUDER - LOWER DEFLECTORS 1998-2004 Item #: SUZ04001 |
$28.95
|
TiteBike offers SUZUKI VL 1500 LC INTRUDER LOWER DEFLECTORS 1998 - 2004. Made from 5mm (0.187 = 3/16") thick cast military aircraft grade acrylic. Available in clear and light grey tint. Lower deflectors are manufactured to order. Edges are hand ground and polished to a brilliant luster. |
|
 |
| TiteBike Windshield - SUZUKI VL 1500 LC INTRUDER 1998-2004 Item #: SUZ01005 |
$115.95
|
TiteBike replacement windshield for SUZUKI VL 1500 LC INTRUDER 1998 - 2004 is available in different heights to suit your riding style. TiteBike offers: 15" - 25" Height, 23" - 25" Width. Handcrafted from 5mm (0.187 = 3/16") thick cast military aircraft grade acrylic, specified for optical clarity and is thicker than the original. Available in clear and light grey tint. All shields are D.O.T. approved and are manufactured to order . Edges are hand ground and polished. All holes are CNC drilled to match your original mounting hardware. Height is measured from the top of the headlight cutout to the top of the windshield and width at widest point. OEM Measuremnets 19" Height, 23" Width
NOTE: Windshield does not come with hardware.
|
|
 |
| TiteBike Windshield - SUZUKI VL 800 VOLUSIA 2001-2004 Item #: SUZ01006 |
$115.95
|
OEM Measurements 20" Height, 22" Width
TiteBike replacement windshield for SUZUKI VL 800 VOLUSIA 2001 - 2004 is available in different heights to suit your riding style. TiteBike offers: 15" - 26" Height, 22" - 26" Width. Handcrafted from 5mm (0.187 = 3/16") thick cast military aircraft grade acrylic, specified for optical clarity and is thicker than the stock OEM. Available in clear and light grey tint. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. All holes are CNC drilled to match your original mounting hardware. Height is measured from the top of the headlight cutout to the top of the windshield and width at widest point. Compatibility: OEM Hardware P/N: 99950-72015.
NOTE: Windshield does not come with hardware.
|
|
|