On orders placed before midnight this Sunday (2/12/2012) (Free shipping for lower 48 US only)
|
|
| |
|
TiteBike Cruiser Windshields
TiteBike recommends the following products to polish their windscreens: Plexus; Novus 123 (1 clean, 2 scratches, 3 minor scratches); Meguiar's mirror glaze #17, Brilliamize.
 |
| TiteBike Windshield - Ducati Multistrada 1200 2010 Item #: DUC01001 |
$165.95
|
OEM Measurements 16.25" Height, 12" Width
TiteBike replacement windshield for DUCATI MULTISTRADA 1200 2010 Models is available in different heights to suite your riding style. TiteBike offers: 19" - 23" Height, 16" Width. Windshield is wider than the original Ducati OEM windscreen and has a slight reverse contour that pushes the air and rain up higher creating a large and quieter pocket. Provides excellent arms and torso wind protection. Beautifully handcrafted from 0.187 (3/16") thick cast military aircraft grade acrylic, specified for optical clarity. Available in Clear and Light Gray. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. CNC cut and drilled ready to install. Height is measured from center of the bottom hole to the top of the windshield and width near the top. Installation kit included.
|
|
 |
| TiteBike Windshield - TRIUMPH ROCKET III TOURING 2008-UP Item #: TRI01001 |
$155.95
|
| OEM Measurement 16" Height, 24" Width
TiteBike replacement windshield fits Single Headlight TRIUMPH ROCKET III TOURING 2008-UP Models. Available in different heights to suit your riding style. TiteBike offers: 12" - 23" Height, 24" - 26" Width. Handcrafted from 0.187 (3/16") thick cast military aircraft grade acrylic, specified for optical clarity. Available in Clear and Light Gray. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. All holes are CNC drilled to match your OEM hardware. High is measured from the top of the headlight cutout to the top of the windshield and width at widest point. Installation is simply removing your existing shield, and reusing the same hardware for re-installation of replacement windshield. |
|
 |
| TiteBike Windshield - Vetter WINDJAMMER Item #: VET01001 |
$90.95
|
OEM Measurements 21" Height, 18" Width
TiteBike replacement windshield for VETTER – WINDJAMMER I, WINDJAMMER II, WINDJAMMER III, WINDJAMMER IV, WINDJAMMER V, WINDJAMMER SS is available in shorter and taller sizes than the stock OEM. TiteBike offers: 19" - 25" Heights, 19" Width. Beautifully handcrafted from 5mm (.187=3/16") thick cast military aircraft grade acrylic, specified for optical clarity. Available in clear and light grey tint. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. All holes are CNC drilled to match the factory specifications. Height is measured along the center line of windshield and width near the top.
|
|
|