Machined from 6061 billet aluminum and then anodized in beautiful black. Designed to be fully adjustable either forward or backwards. These adjustable bar mounts will fit directly into any 1 1/8" perch allowing the use of any 1 1/8" (fat bar) handlebars or 7/8 (standard) handlebars. These mounts have a 1.5" rise.

NOTE: ADJUSTABLE CLAMP WILL ONLY FIT A 1 1/8 PERCH

Machined from 6061 billet aluminum and then anodized in beautiful black. Designed to be fully adjustable either forward or backwards. These adjustable bar mounts will fit directly into any 1 1/8" perch allowing the use of any 1 1/8" (fat bar) handlebars or 7/8 (standard) handlebars. These mounts have a 1.5" rise.

NOTE: ADJUSTABLE CLAMP WILL ONLY FIT A 1 1/8 PERCH

The H121 risers fit Honda 1" diameter tube style handle bars. The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.

The X103/X104 risers will fit any nearly any motorcycle with a standard bolt patter using 7/8" (20mm) diameter tube style handlebars. Please use reasonable caution when testing them on new models. The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Most models require no change of any control cables, wiring, or hoses. X104 risers are identical in specs, with a black anodized finish.

The risers replace the stock 7/8" tube type handlebar clamp-cap to raise the bars up 1" (25mm) and back 1 3/8" (35mm). This will help to relieve wrist and neck pain on long rides. May require some re-routing of control cables, wiring, or hoses. X102B is the black anodized version of X102. Does not fit 1" tube handlebars.

These clipons have a one inch rise over a conventional 50mm clipon. This rise is very similar to the stock rise on a GSXR handlebar. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up a little higher. This is a UNIVERSAL application - you must determine the fit and application of these riders to your motorcycle. Once installed in any way (screws tightened) they may NOT be returned. You may need to modify any of the following: Brake lines, Throttle cables, Clutch lines/cables, or electrical wiring harnesses.

These clipons have a one inch rise over a conventional 50mm clipon. This rise is very similar to the stock rise on a GSXR handlebar. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up a little higher. This is a UNIVERSAL application - you must determine the fit and application of these riders to your motorcycle. Once installed in any way (screws tightened) they may NOT be returned. You may need to modify any of the following: Brake lines, Throttle cables, Clutch lines/cables, or electrical wiring harnesses.

These clipons have a one inch rise over a conventional 50mm clipon. This rise is very similar to the stock rise on a GSXR handlebar. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up a little higher. This is a UNIVERSAL application - you must determine the fit and application of these riders to your motorcycle. Once installed in any way (screws tightened) they may NOT be returned. You may need to modify any of the following: Brake lines, Throttle cables, Clutch lines/cables, or electrical wiring harnesses.