|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: With the 7850.21 and the 7850.11 what is the Brembo recomended break in procedure for these
Thanks John. |
| ANSWER: The pads in these calipers is a very good sintered compound which does not require too much special care for the bedding process. Start with light braking and work up to normal/hard braking without reaching excessive temperatures. Basically you need to gradually increase temps w/o causing thermal shock and or hot spotting on the rotors. No brake dragging just normal use with some space in between applications. |
|
| QUESTION: Yes! I need 2 (two) banjo bolts and washers for them.
Tell me how to order them.
Thanks, John
|
| ANSWER: You need single banjos part number 06.2228.42 and washers part number 06.2196.13. Let us know how many you need. You should have a page on 1tails website to help with your order.
Thank You! |
|
| QUESTION: Hello
I just recently purchased calipers #s 20.78521 and 20.785011 do you carry the banjo bolts and seals for brake lines if so what are part#s and price.
Thanks John. |
| ANSWER: I only have the banjo bolts. Let me now if you want them. Single is part number 06.2228.42 at $1.72 each. |
|
| QUESTION: Do you stock the replacement pads for these calipers? If so, what is the part number(for future reference) and the price? Thank You. |
| ANSWER: part numbers are 107.7855.10 and 107.7855.11. I try to stock the standard and the sintered pads. |
|
| QUESTION: hi guys,do you have adapters so i could fit these calipers to an 05 ZRX1200r |
| ANSWER: This part has been discontinued. |
|
| QUESTION: Thanks for the quick response.
Just to make sure I have everything clear: the part numbers I need for a set of left and right hand side calipers are 20.7850.21 and 20.7850.11? Is that right? How come they are different prices on the website?
Secondly, what shipping method would you recommend to Australia (South Australia in fact, Campbelltown, post code 5074) that will be fairly quick but at a reasonable cost? (I'll happily pay up to $75US)
Thanks for your help.
Peter. |
| ANSWER: The prices should be the same. I would say US Postal service would be cheapest. |
|
| QUESTION: Man that's a great price on these calipers! Are these the ones that fit the '99 onward Ducatis? That is are the mounting holes 65mm apart? Can you give me the best shipping price to Australia? USPS for example air freight.
Thanks. |
| ANSWER: They are indeed the part that is on the '99 and up Ducati's. We can ship in any manner you prefer.
|
|
| QUESTION: Are these available in right or left and how do you order left or right/ Also what kind of pads come with these? |
| ANSWER: 20.7850.21 is the right side and 20.7850.11 is the left side.
The pad compound is tt2172 sintered. They are a copper color. |
|
| QUESTION: Does this price include the pads? if not, how much for the pads?
Shipping outside of the US? (Europe) |
| ANSWER: The price does include pads. Depending on how it is shipped your freight charges will be anywhere form $30.00 up to $100.00. How would you want it shipped? |
|
| QUESTION: Does this caliper only come in sliver or can you get it in Gold. Thank you. |
| ANSWER: The part number you have 20.7851.21 is gold! So, yes they are avialble in gold. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by WordPress e-commerce company