|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Can’t find a matching part number? Find the piston size of your unit. Front Master Cylinders - check the top or bottom of the lever clevis for a stamped alphanumeric string. The last two digits in the string indicate the piston size in mm (EXAMPLE: ‘1PJK 15’ = 15mm piston. In the case of ‘Radial-GP’ pumps, you may see a ‘PR’ or ‘/’’ stamping, followed by a number. If the number is “19x18” or “16x18”, the first number is piston size, the second refers to the pivot centers of the unit’s lever). Rear Master Cylinders - for lever-types, check clevis area as above. If rod-actuated, check the entire body for the alphanumeric string or a string starting with ‘PS’ (EXAMPLE: ‘PS12’ = 12mm piston). |
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: Brembo -Clutch lever Master Cylinder (Machined)
stamped 7K8 13
Is this to small? hard to pull in. |
| ANSWER: I don't understand your question. |
|
| QUESTION: I have a 95 400SS- It needs a PS13- but don`t know exact item no. Will any of the PS13 Clutch MC work? For example Item #: 10.4670.14 |
| ANSWER: You can go with any of them. The newest part number is the 10.6940.23. It also has a new part number os 10.9740.23.
Thak You,
Jolene |
|
| QUESTION: I know this is a race site, not a stunt site, but would a hydrolic clutch lever work for a Rear handbrake adapter? |
| ANSWER: We are new to this facet of the motorcycle industry as well but have gained some experience working with Jason Britton and the No Limit team this past year. He uses a Brembo radial master cylinder mounted on the clutch side to actuate the rear brake. I believe he used the 19x18 billet clutch code 10.5800.10 and he seems to like the feel of it. |
|
| QUESTION: I was looking at item no.10.5065.13 Brembo PS13 clutch m/cylinder.I'm looking for the same item but with the silver lever.
Can you give me the part number for the same master cylinder with the silver lever?
|
| ANSWER: That model would not be available in silver lever. You will need to go to the newer model part number 10.6940.23. The lever is slightly different.
Thanks,
Jolene |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by WordPress e-commerce company