|
| Ducati Monster S2R/S4R Handlebar Risers - All Years |
The risers are placed between the fork crown and the 1 1/8" handlebars to raise the bars up 1 1/4" (32mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. They are anodized to match the color of the stock bar mounts. Requires no change of any control cables, wiring, or hoses.
|
| |
| Item no. D100 |
| Today's Sale Price: $75.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: I have a 2008 Ducati Monster S4RS. Will your riser fit this bike? |
| ANSWER: The D-100 risers will fit the 2008 S4RS. |
|
| QUESTION: Got any handlebar riser kits for the 2008 Ducati 1098, or something that will work? Casey Cottrill, Phone Guy |
| ANSWER: Hi Casey,
We currently do not offer a riser for the 1098. Sorry we couldn't help you out.
Thank you,
Scott-GenMar |
|
| QUESTION: i have three questions..which risers if any will fit a s2r 800 07 model. how long will they take to post to brisbane australia and how many are in the kit for $75.95 both or just the one |
| ANSWER: Hi,
The D-100 risers will fit the S2R. Orders shipped to Australia usually take 7-10 days to arrive. The risers come in complete sets for $75.95.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Do you have bar risers for the Ducati Streetfighter S? pls advise... |
| ANSWER: Hi,
We currently do not offer risers for the Streetfighter. Sorry we coudln't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Will these fit Protaper 1 1/8 bar mounts? Thanks! |
| ANSWER: Hi,
The bolt hole spacing is different and the D-100 risers will not work with the Protaper mounts. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: What about risers for the GT1000. I've fitted the Ducati screen and now the bars really need to be a bit further back |
| ANSWER: Hi,
Our D-103 risers will fit the GT1000. We offer them in a semi-polished finished to match the GTs triple-clamp. They are the same dimensions as the D-100 risers but for a smaller diameter handlebar.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: I own a 2004 S4R, however I believe my bike does not have 1 1/8" bars it appears to have 7/8" bars. The steering head has a riser cast into with with the saddle for the existing bars. I could send you a picture if necessary. |
| ANSWER: If your bike has 7/8" bars, then you will want to order our D-103 risers for the Monster.
Thank you,
Scott-GenMar |
|
| QUESTION: Hi, D100 risers for 2005 S4r, is this correct? thank you. Buddy M |
| ANSWER: Hi Buddy,
The D-100 risers are the correct part # for the 2005 S4R.
Thank you,
Scott-GenMar |
|
| QUESTION: How much is freight to Melbourne Australia Psot Code 3074.
Thanks Ron |
| ANSWER: |
|
| QUESTION: Sir, which model bar risers will fit my '02 s4 monster? thanks kw |
| ANSWER: The D-100 risers are the correct part # for the 02 S4.
Thank you,
Scott-Genmar |
|
| QUESTION: I need risers for a 2005 Ducati Multistrada...has 7/8"handlebars. Do you have an application that will work? Thanks
Ken |
| ANSWER: Hi Ken,
Our X-103 risers will work on the 05 Multistrada.
Thank you,
Scott-Genmar |
|
| QUESTION: Will these fit on my 2007 S4RS, and do you have a picture of them? Thanks Roberto |
| ANSWER: The D-100 risers will fit the 07 S4RS. We do have a picture of the risers on our web site.
Thank you,
Scott-GenMar |
|
| QUESTION: Hi, I have a 1999 st2 do you have a set for me.Thank You. |
| ANSWER: Hi,
We no longer carry risers for the ST2. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Will these risers fit a 2007 Ducati Multistrada 1100s with the 1 1/8" bars? If not do you sell risers that will work with this bike?
Thanks, Rod.. |
| ANSWER: Hi Rod,
The D-100 risers will fit the 07 Multistrada but are smaller in diameter than the stock handlebar clamps. We are currently in the works on a bike specific riser for the 07 Multistrada. If you can hold out a couple weeks, we will have a riser for your bike.
Thank you,
Scott-Genmar |
|
| QUESTION: Do you have risers for my 2001 Ducati 748S model? If not which ones would you recommend? |
| ANSWER: Hi,
We currently do not offer a riser for the 748S. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-genmar |
|
| QUESTION: Hi, will these fit 2007 S2R 1000 monster that comes with the magura bar |
| ANSWER: Hi,
The D-100 risers will fit the 07 S2R1000 with 1 1/8" bars.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: will these fit a 2008 r4rs monster? |
| ANSWER: Hi,
We haven't had a chance to put them on the 08 R4RS. The information that we have says they will fit but we like to put them on the bike and make sure there wasn't any major changes. Please check back with us at the end of next week.
Thank you,
Scott-GenMar |
|
| QUESTION: Hi
Would you post to Melbourne Australia ?
Cheers,
Ran |
| ANSWER: Hi Ran,
We do ship to Australia daily.
Thank you,
Scott-GenMar |
|
| QUESTION: Hello, do your risers, item D100 work for a 2000 Ducati Monster 900?
Are they in stock?
|
| ANSWER: Hi,
The D-100 risers will not work on the 2000 Monster 900. You will want to order part # X-103 and they are in stock.
Thank you,
Scott-GenMar |
|
| QUESTION: do you have handlebar risers to suit Ducati 900ss 2000 model,regards Graeme |
| ANSWER: Hi,
We currently do not offer a riser for the 900ss. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Hi, do you ship to the UK or do you have a UK distributor ?
Many thanks
Neil |
| ANSWER: Hi,
We do ship to the UK daily.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Will these fit on a 2006 S2R? Many thanks AV |
| ANSWER: Hi,
The D-100 risers will fit the 06 S2R with no change to the control cables necessary.
Thank you,
Scott-Genmnar |
|
| QUESTION: Will these fit the 1998 ST2? Thanks. Ken |
| ANSWER: Hi Ken,
We currently do not offer a riser for the ST2. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: I have a 2001 ducati monster s4 with a set of woodcraft clipons, can I use this riser kit for these or are they only for the stock clipons..
Thank you Brian.... |
| ANSWER: Hi Brian,
Our risers will only work with the stock handlebar set-up.
Thank you,
Scott-GenMar |
|
| QUESTION: your web siet does not have a photo of the risers for Ducati Monster S2R. Do they look like the ones for other Monsters (620, etc)? |
| ANSWER: Hi,
Our page must be temporarily down. The risers are very similar to our D-103 risers with the exception that they are for 1 1/8" bars instead of 7/8". They dimensions are exactly the same.
Thank you,
Scott-GenMar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by seo company