|
| Handlebar Risers - BEVELED - Kawasaki Mean Streak/ Suzuki Volusia |
These risers are identical in function to the X12 risers. The only difference is the beveled cut instead of the straight cut.
The risers are placed between the fork crown and the handlebars to raise the bars up 2" (50.8mm) and back 1 1/8" (28.5mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.
Fits:
Kawasaki Mean Streak, All years
Suzuki Volusia, Bar specific
|
| |
| Item no. X11 |
Retail: $69.95 (PLUS shipping) |
| Today's Sale Price: $69.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: I should have looked closer, it looks like 2'' am I right? |
| ANSWER: The X-11 risers are 2" tall. |
|
| QUESTION: DO THESE BOLT RIGHT ON A 2005 KAWASAKI MEANSTREAK VN1600 WITHOUT ANY MODIFICATIONS |
| ANSWER: The X-11 risers are a simple bolt-on installation. You will have to place some of the cables outside the wire loom brackets, but a very simple installation.
Thank you,
Scott-GenMar |
|
| QUESTION: I have a 2006 Kawasaki Vulcan 1600 Classic A, I just put on RAD' KAW DRAG BAR, ENFERNO From Barron, Dimensions: Diameter: 1-1/4", Width: 33", Rise: 7-1/2", Pullback: 7-1/2". Will these work. Thanx Scott Fayant
|
| ANSWER: Hi Scott,
We have not tried that combination here in the shop and don't have any information on file. Sorry we couldn't help you out.
Thank you,
Scott-GenMar |
|
| QUESTION: I have a 2008 kawasaki mean streak special edition. Do you recommend the black anodized risers for this bike? |
| ANSWER: Most people do go with the black risers on the special edition. you can't even tell they are on the bike.
Thank you,
Scott-GenMar |
|
| QUESTION: I have a 1997 Suzuki vz800 Marauder. Do I need the X-11 or the X-12 risers? |
| ANSWER: Either the X-11 or X-12 will fit on the 97 Marauder. They are the same riser just shapped different for cosmetic purposes.
Thank you,
Scott-Genmar |
|
| QUESTION: I have a 2008 Kawasaki Vulcan 900 Custom. Will these risers work on my bike? These are the closest to what I need. I have the same kind of handlebars. |
| ANSWER: Hi,
The X-11 risers will not work on the Vulcan 900.
Thank you,
Scott-Genmar |
|
| QUESTION: how is the thred going to reach the bottom of the crown. |
| ANSWER: The riser screws onto the stud at the base of the handlebar and then a bolt is ran from the bottom of the triple-clamp up into the riser.
Thank you,
Scott-GenMar |
|
| QUESTION: I'm looking for some reasonable handlebar risers for my 2006 Suzuki C50 that will not require changing of any controls. I'd prefer to not reroute any of them either if possible. You show a product that rises 2" and pulls back 1 1/8" for the Volusia. Will this product also work for my application.....I just want to order the right thing the first time. Thanks for your help. |
| ANSWER: Hi,
Which model C50 do you have? There is a big difference between the C50 and the C50T as far as risers go. We do have risers for the C50 but not the T model. The risers are our part # S-130 and are the same risers that fit the C90.
Thank you,
Scott-GenMar |
|
| QUESTION: Will these work for a 2002 Suzuki Volusia 800 - I noticed they don't fit the C50 which is virtually the same bike?? Thank |
| ANSWER: Hi,
The X-11 risers will not fit the 02 Volusia 800.
Thank you,
Scott-GenMar |
|
| QUESTION: Will these fit the suzuki vz1600 marauder
thank you
Ed Van Auken |
| ANSWER: Hi Ed,
The X-11 risers will fit the VZ1600 Marauder.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: I have a 2002 meanstreak.does the thread stock on the stock bars get removed and replaced with the new hardware with these risers i was told that cant be done are they wrong. Thanks Hank |
| ANSWER: Hi Hank,
The risers actually screw onto the base of your stock handlebar and a bolt is ran up into the risers from the bottom of the triple-clamp. You don't remove anything from the stock handlebar.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Does this come with all mounting hardware?
2005 Suzuki Boulevard Handlebar Risers C50 |
| ANSWER: The X-11 risers do come with all the mounting hardware necessary to install the risers. We currently do not carry a riser for the Boulevard C50.
Thanks for the inquiry,
Scott-GenMar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by seo company