|
| Kawasaki Ninja EX500 Handlebar Risers - all years |
The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (38mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses.
|
| |
| Item no. K107 |
| Today's Sale Price: $110.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: do you have risers for GPz600r Ninja? Thanks.
|
| ANSWER: We currently do not offer a riser for the GPZ600. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: do they make handle bars and risers for a 2007 ex-650 to change from a sport-tourer style to a sport gsxr style? |
| ANSWER: Hi,
We currently do not offer a conversion kit for the EX-650. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: i would like to order a set for the zx14 2006 can you send me a e mail when ready for order. thank you. (tmcnair@nyc.rr.com) |
| ANSWER: Hi,
We currently have the ZX-14 risers available. They are our part # K-115. The raisers will raise the bars up 1" and back about 5/8" due to the angle. No changes to the control cables are necessary.
Thanks for the inquiry,
Scott-GEnmar |
|
| QUESTION: G'Day
Do you have risers for 2001 ZX750
Cheers Gleyn |
| ANSWER: Hi Gleyn,
We currently do not carry risers for the ZX750. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: URGENT PLEASE::: I have a 2006 Ninja Kawasaki ZX 1400....I beleive the handlebar etc system is the same as the ZX 1200. Do you folks sell a riser kit similar to this one for my new bike...? If so please respond ASAP and I will buy it. thank you, Paul Clapper, Syracuse, NY |
| ANSWER: Hi Paul,
Our new risers for the ZX-14 are nearing completion and should available for sale in a couple of weeks.
Thank you,
Bruce-GenMar |
|
| QUESTION: How do I order the K-108 risers for my Ninja EX250? I have never ordered from you before and I don't see a way to order the risers.
Thanks,
Hugh Irvin |
| ANSWER: |
|
| QUESTION: Will these risers let the forks come up into them to lower the front.Because I lowered the rear and I'm trying to even out the suspention. |
| ANSWER: Hi,
If you remove the tube from inside of our riser, you will be able to raise the fork tubes up into the riser and lower the front of the bike.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: is there a small tube inside the risers for the ex500 bars to set on and bolt down |
| ANSWER: Hi,
There is a small tube inside the EX500 risers. The tube raises up and locks the bars and risers together.
Thank you,
Scott-GenMar |
|
| QUESTION: do they make a similar kit for an EX250R?? |
| ANSWER: Hi,
We do make risers for the EX250. They are our part # K-108 and will raise the bars up 1 1/4" and get them back toward you almost 3/4".
Thanks for the inquiry,
Scott-GenMar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by