|
| Kawasaki Vulcan, Vulcan Drifter, and Vulcan Nomad Handlebar Risers |
These risers fit Vulcans with 1" (25mm) tube handlebars. The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Longer bolts are supplied. Requires no change of any control cables, wiring, or hoses.
Applications:
-Vulcan 1998-current
-Vulcan Drifter 1998-current
-Vulcan Nomad 1998-current
|
| |
| Item no. K112 |
| Today's Sale Price: $90.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
K-112 handlebar risers installed on a Vulcan Nomad. Photo courtesy of Jim Yearwood.
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: Hello, do you have this part # k-112 , risers for a 2008 Kawasaki Vulcan Nomad in stock?
Thanks |
| ANSWER: The K-112 risers are in stock.
Thank you,
Scott-Genmar |
|
| QUESTION: I need risers for a vulcan 900 custom, any suggestions?
|
| ANSWER: Our K-112 risers will fit the 900 custom.
Thank you,
Scott-GenMar |
|
| QUESTION: Will these risers fit a 06 Vulcan Nomad? How far back does it allow me to move the handlebars? Will it work with stock cabling? Thanks!! Kevin |
| ANSWER: The K-112 risers will fit the 06 Vulcan Nomad. It will allow you to rotate the bars further back than with only the stock risers. You will not have to change or reroute any of the control cables.
Thank you,
Scott-Genmar |
|
| QUESTION: It seems that just about every part that i look for for the Vulcan 2000 classic lt, its not made. Do you have an idea when these will be manufactured? This is a real big bike and we 2000 owners need some relief. Thanks!!!!!!! |
| ANSWER: We currently do not have plans to make risers for the Vulcan 2000. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: I have a 2001 Kawasaki Vulcan 1500 I'm looking for some risers 2 up 2 back will these work |
| ANSWER: The K-112 risers will raise the bars up 1 1/4" and back about 3/4".
Thank you,
Scott-Genmar |
|
| QUESTION: Will the K-112 fit my 2008 Vulcan 1600 Classic ? How much will the K-K122 raise and back the bars ? Also, any implications on the control cables ? |
| ANSWER: The K-112 risers will fit the 08 1600 Classic without any changes to the control cables. The risers will raise the bars up 1 1/4" and back almost 3/4" due to the angle.
Thank you,
Scott-GenMar |
|
| QUESTION: will these fit a 2005 Kawasaki 1500 Fi |
| ANSWER: Hi,
The K-112 risers will fit the vulcan 1500 Fi.
Thank you,
Scott-GenMar |
|
| QUESTION: I HAVE A 2007 VULCAN 900 CLASSIC LT. I NEED THE HANDLEBARS TO COME BACK ABOUT AN INCH. ALSO RISERS WOULD HELP TOO. DO YOU HAVE A MODEL THAT WILL WORK WITHOUT LENGTHING THE CABLES? YOUR HELP WILL BE APPRECIATED. BILL SURLES |
| ANSWER: Hi,
Our K-112 risers will raise the bars up 1 1/4" and back almost 3/4" due to the angle. No changes to the control cables are necessary.
Thank you,
Scott-GenMar |
|
| QUESTION: looking for fender tips for 2005 kawasaki 800 drifter can anyone help. |
| ANSWER: |
|
| QUESTION: My wife has a Vulcan 900 classic. We need to raise the handlebars and move then back a little. What do you suggest |
| ANSWER: Hi,
We currently only carry the K-112 risers for the Vulcan 900 which will raise the bars up 1 1/4" and back almost 3/4" due to the angle of the stock risers.
Thank you,
Scott-GenMar |
|
| QUESTION: I have a 2006 Vulcan 900 Classic. Will these fit? |
| ANSWER: Hi,
The K-112 risers will fit on the 2006 Vulcan 900 Classic. You will not have to change or re-route any of the control cables.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: I have a 2005 Drifter. Finding neutral at a stop is really difficult at times. What is the problem? What is the proper adjustment for the free play clutch handle? |
| ANSWER: |
|
| QUESTION: Will these risers fit a 2002 Mean Streak? |
| ANSWER: Hi,
The K-112 risers will not fit the Mean Streak. However, we do carry bike specific risers for the Mean Streak part # X-11/X-12.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: will these fit a 2000 vulcan 800B. |
| ANSWER: Hi,
The K-112 risers will fit the 2000 Vulcan 800 with no changes to the control cables.
Thank you,
Scott-GenMar |
|
| QUESTION: Free shipping to Victoria British Columbia Canada Postal V8L 3T8 ????????
US postal.... Ray H |
| ANSWER: |
|
| QUESTION: Will these also work on Harley davidson 1" handlebars? |
| ANSWER: Hi,
The K-112s will not work on a Harley. The bolt hole spacing is different.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Do you have any risers 1-2 "/ with a pullback of 1-2" for a vulcan nomad 2006 that can adapt like the ones shown. Or do make risers/pullbacks that are 2" rise with a 3" pullback? |
| ANSWER: Hi,
We currently only carry the one model riser for the Vulcan Nomad. The K-112 risers will fit the 2006 1600 but not the 2000.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: will these risers fit my 2006 vulcan 200 classic LT |
| ANSWER: Hi,
We currently do not carry a riser for the Vulcan 2000. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: will these risers fit the vulcan 800-a? |
| ANSWER: Hi,
The K-112 risers will fit the 800. The 750 uses our part number X-103.
Thank you,
Scott-GenMar |
|
| QUESTION: I have a 2005 Kawasaki Nomad.The K112 risers, are they polished or chrome? My fork crown and cap are chromed. I am not sure how these will look if polished. |
| ANSWER: The risers are polished but if you did not know you would think they were chrome they match up with the stock look very well.
Thank You,
Genmar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by