|
| Kawasaki Z1000/ Z750 Handlebar Risers - All years |
The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/2" (38mm) and back 1" (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. The risers are cut and powder coated to match the factory bracket.
Top Clamp not included, Stock top clamp shown for color purposes |
| |
| Item no. K100 |
| Today's Sale Price: $91.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: Will this fit Z750 2008 model? |
| ANSWER: The K-100 risers will fit the 08 Z750.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Is it free shipping to CA? |
| ANSWER: |
|
| QUESTION: Hi,
I am after some handlebar risers to suit a Kawasaki Z750 2008 model. Do you stock these? If so how much are they?
Also I live in Queensland Australia.
Regards,
Craig.
|
| ANSWER: |
|
| QUESTION: do you have risers that fit a 1981 kawasaki kz1300? |
| ANSWER: Hi,
Our X-104 risers will fit the KZ1300. They will raise the bars up 1" and back about 5/8" due to the angle without any changes to the control cables.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Will these fit my 83 GP z750a? |
| ANSWER: Hi,
We currently do not offer a riser that will fit an 83 GPZ750. Sorry we couldn't help you out.
Thank you,
Scott-GenMar |
|
| QUESTION: Hi,
i wanto to know if it is possible to pay yoo with PayPal
Kind regard
Decio Marco Della Fortuna |
| ANSWER: |
|
| QUESTION: I just want to be certain, do these risers perfectly fit the 2006 Kawasaki Z750S model? |
| ANSWER: The K-100 risers will perfectly fit the 06 Z750S. You will not need to lengthen or re-route any of the control cables.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: How much do you charge to ship to the UK?
Thanks,
Dave. |
| ANSWER: |
|
| QUESTION: do these come for
[82)kz1100b1(gpz1100b1) |
| ANSWER: Hi,
We do not offer a riser for the 1982 Kawasaki GPZ1100. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Does it fit the Z750 (2004 , not the S model) ? |
| ANSWER: Hi,
The K-100 risers do fit the Z750 without any changes to the control cables necessary.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Hi, Are these risers available with a 1" rise? Thanks, Jerry |
| ANSWER: Hi Jerry,
We currently only carry the K-100s in 1 1/2". However, we could make you a 1" version. It would take about 4-5 days to fit on the mill.
Thank you,
Scott-GenMar |
|
| QUESTION: Hi i have a z1000 do you ship to the uk and how long will they take to arrive ? Thanks Tony |
| ANSWER: Hi Tony,
We do ship to the UK daily. We ship our international orders via global priority through the US Postal Service which usually takes 5-7 days to arrive in the UK.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Is this set a genuine GenMar Mfg. product? I don't see the GenMar name here. Also, the installation link does not work. Thanks! |
| ANSWER: Hi,
Yes, the risers are made by GenMar. Orders placed on this web are drop-shipped directly from GenMar Mfg.
Thank you,
Scott |
|
| QUESTION: Does adding these risers require any cable re-routing on the Z750S? Will the brake lever or anything else interfere with the fairing with the bars fully turned in either direction, or will the bars/controls hit the tank? Thanks! |
| ANSWER: Hi,
You will not need to change or reroute any of the control cables on the Z750S. You will have plenty of clearance with the risers installed and will not have any interference when the bars are turned full left and full right.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Does it fit the Z750S? |
| ANSWER: Hi,
Our K-100 risers do fit on the Z750S. The handlebars are exactly the same as the Z1000.
Thanks for the inquiry,
Scott-Genmar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by