|
| Kawasaki ZZR1200 Handlebar Risers - all years |
The risers are placed between the fork crown and the handlebars to raise the bars up 1 1/4" (32mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.
|
| |
| Item no. K102 |
| Today's Sale Price: $110.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
K102 handlebar risers mounted on a Kawasaki ZZR1200
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: Hello
I leave in quebec city
is it stock item k102 and the pric is 110.95 us
what is the freight for you ship to me
Zip code G6J 1P7
what is the delivery time
thanks
claude rousseau
|
| ANSWER: |
|
| QUESTION: Hi scott ,noted in your q&a part #k-101 will fit a 1993 zzr1100 (zx 1100) will these fit a 1995 model. and could you give me a shipping price to the united kingdom ,
Many thank Paul. |
| ANSWER: Hi Paul,
The K-101 risers will fit the 1995 ZZR1100. We do ship to the UK Daily.
Thank you,
Scott-Genmar |
|
| QUESTION: I have an 05 zzr 1200 with Heli bars on it can I still use your risers to get a little moree |
| ANSWER: Hi,
We have not tried that combination here in the shop. I don't see why they will not work together but I don't have the information to confirm it.
Thank you,
Scott-Genmar |
|
| QUESTION: If I stack two sets of risers for the ZZR 1200 can you supply the longer bolt required? |
| ANSWER: We do stock the bolts you will need.
Thank you,
Scott-GenMar |
|
| QUESTION: Was wondering if the risers for the ZX-14 are available yet? |
| ANSWER: Hi,
We do have risers for the ZX-14 available. They are our part # K-115 and will raise the bars up1" and back about 5/8" due to the angle. No changes to the control cables are necessary.
Thank you,
Scott-GenMar |
|
| QUESTION: 05 zzr 1200...would it be possible to two risers together to get more lift??? |
| ANSWER: Hi,
You can stack two sets of the K-102 risers together if you are willing to re-route and change some of the control cables.
Thank you,
Scott-GenMar |
|
| QUESTION: Is this free shipping to the UK? |
| ANSWER: |
|
| QUESTION: Hello is there any time frame for risers for the ZX1200 PLEASE LET ME KNOW Thank you |
| ANSWER: Hi,
We currently do not have plans to offer a riser for the ZX-12. Sorry we couldn't help you out.
Thank you,
Scott-GenMar |
|
| QUESTION: I just purchased a 2003 ZX1200R, and finding it to be the red headed stepchild of Kawasaki. Will any of your risers work for my bike? Thank you in advance for your help, Sean Hougen |
| ANSWER: Hi Sean,
We currently do not carry a riser for the ZX-12. Sorry we couldn't help you out.
Thank you,
Scott-GenMar |
|
| QUESTION: can you send the installation instructions for the risers ZZR1200 |
| ANSWER: |
|
| QUESTION: need risers for zx-14. your Q & A does not have a date, so when will they be out and how much will they be? |
| ANSWER: Hi,
The risers should be finished in the next 2 weeks if we don't run into any snags.
Thank you,
Scott-GenMar |
|
| QUESTION: what do you have for the zx14? |
| ANSWER: We currently do not have a riser for the ZX-14 but we will in the next 3-4 weeks. You might check back with us then.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: I have a 05 ZZR 1200 and desperately need this product. I was wondering if the risers would create any more vibration. I get a little vibration now and don’t want to do anything that will give me more. |
| ANSWER: Hi,
The risers will not increase the vibration. Because you will have less weight on the palms of your hands, it will actually feel like there is less vibration.
We have the K-102 risers in stock and ready to ship.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Hello greetings from the uk. I have a zzr1100 D1 1993. This product would be just great. Do they fit the zzr 1100 asswell.
best wishes
martin |
| ANSWER: Hi,
Our K-102s will not fit the ZZR1100. However, our part # K-101 is made specifically for the ZZR1100.
Thanks for the inquiry,
Scott-Genmar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by