|
|
| PIG SPOTTER MIRRORS: Universal Fit , Carbon Fiber |
NEW! Photos coming soon.
Sold in Pairs
Carbon Fiber
These are universal
Features hidden LED turn signal underneath the mesh, no LEDs poking through the top
Exceptions: Requires block-off plates and new mounting location for:
Kawasaki ZX14
Honda 929 or 954 |
| |
| This item usually takes about 4 days to ship |
| |
| Item no. 108-7000CF |
| Today's Sale Price: $219.99 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: my answer to you is...ha.....that its held with a bolt and nut...so if you can help me out ...and i wanted to find out how are tey universal are they adjustable or what
------------------
Your Question is:
I wanted to see if these mirrors would fit on my '07 Hyosung GT650R and if i didnt want them the leds to work would i still require any drilling. or modifications..
Our Answer is:
Not if you dont want to run the LEDs. The question I have for you is ,are your stock mirros held on to the fairing with just a bolt or bolt and nut? If it is just a bolt does it go all the way through the fairing under structure or does it bottom out? |
| ANSWER: Then these will fit just fine. Remove your stock mirrors . Position the PS2s over stock location. Using the supplied drill bit,smaller of the two bits supplied, from underneathe your fairing structure insert drill bit through the stock mounting post and drill into the base of the Pig Spotter Mirror. Feed the first screw and repeat process. |
|
| QUESTION: I wanted to see if these mirrors would fit on my '07 Hyosung GT650R and if i didnt want them the leds to work would i still require any drilling. or modifications.. |
| ANSWER: Not if you dont want to run the LEDs. The question I have for you is ,are your stock mirros held on to the fairing with just a bolt or bolt and nut? If it is just a bolt does it go all the way through the fairing under structure or does it bottom out? |
|
| QUESTION: were do u run the wire |
| ANSWER: Through the fairing. On most bikes you will need to drill a small hole in the fairing in between the two stock mounting posts. We supply the drill bit. The hole will be hidden even if you were to re-install the stock unit. |
|
| QUESTION: When do you expect to have pictures available? What are the dimensions of the mirror base? (i.e. contact area between mirror and fairing). Are they the same on the standard pigspotter mirrors? Thanks. |
| ANSWER: These are the same standard demensions as the regular PS2s. These are available now. Plenty in stock and ready to ship.These sell extremely fast.
1 5/8" is the widest and tapers down to a point
4 1/8" is the length. |
|
| QUESTION: I have an 08 zx10 will they bolt up to the stock mounts or do I have to drill new holes |
| ANSWER: These will fit over the stock location on your bike . |
|
| QUESTION: I have a 2008 Hayabusa, will the carbon pig spotters fit, and where do i tie into the harness for the indicators? |
| ANSWER: Yes they will fit you bike perfectly. . These are universal not bike specific.
The wiring is a simple 2 wire connection. You simply splice the wires into the factory turn signals. You can also wire them as running lights. To use as running lights find a constant hot wire, attach the positive lead from the mirros.then ground the negative . I would suggest using a toggle swith on the positive wire if running as a running light. |
|
| QUESTION: I have a GSXr 600 K5. Will any of these work on my bike. |
| ANSWER: These will fit your bike.These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth sccrews. These will fit on any bike with a full fromt fairing that is semi flat where the mirror mounts to |
|
| QUESTION: ANY PICS YET? AND DO THESE MOUNT RIGHT IN THE EXISTING HOLES ON A 2007 TRIUMPH DAYTONA 675? I KNOW I HAVE TO AT LEAST DRILL FOR THE POWER WIRE. |
| ANSWER: The Carbon mirrors look like all the other Pig Spotter 2's with the exception they are made with real Carbon Fiber.These are universal. You make the bolt pattern on the base of this mirror.We supply the drill bits and different lenghth screws. We have had customers purchase these for your bike and never received any feedback as far as problems fitting them. These will fit on any bike with a full front fairing that is semi flat where the mirror mounts to. |
|
| QUESTION: Are these an easy install on 2008 Honda cbr600rr and when do we get a pic of the carbon fiber version? Thx |
| ANSWER: Look at the ads in 2 Wheel TUNER. These are very easy to install. |
|
| QUESTION: Just ordered the black pig spotters universal. I have a 2007 R6. Are these mirrors going to fit my bike? and if so, is it an easy mount, without any major modifications? |
| ANSWER: Very simple to install. Yes they will fit your bike nicely. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by