|
| Handlebar Risers - Suzuki Bandit 600, Bandit 1200 and SV650 (99-02) |
These risers replace the stock 7/8" tube type handlebar clamp-cap to raise the bars up 1" (25mm) and back 1 3/8" (34mm). This will help to relieve wrist and neck pain on long rides. Includes longer brake line needed for proper installation. Anodized silver finish.
Applications:
-Bandit 600, all years
-Bandit 1200, all years
-SV650 all years - Note that 99-02 need a longer brake line, 03-08 work with stock brake line - see item S121A
|
| |
| This item usually takes about 1 to 2 days to ship |
| |
| Item no. S121 |
Retail: $139.95 (PLUS shipping) |
| Today's Sale Price: $135.95 |
|
|
|
|
| Application Chart |
Diagrams |
Application
Notes |
|
| 1996 Suzuki GSF 1200 BANDIT |
|
|
| 1997 Suzuki GSF 1200 BANDIT |
|
|
| 1998 Suzuki GSF 1200 BANDIT |
|
|
| 1999 Suzuki GSF 1200 BANDIT |
|
|
| 2000 Suzuki GSF 1200 BANDIT |
|
|
| 2001 Suzuki GSF 1200 BANDIT |
|
|
| 2002 Suzuki GSF 1200 BANDIT |
|
|
| 2003 Suzuki GSF 1200 BANDIT |
|
|
| 2004 Suzuki GSF 1200 BANDIT |
|
|
| 2005 Suzuki GSF 1200 BANDIT |
|
|
| 1996 Suzuki GSF 600 |
|
|
| 1997 Suzuki GSF 600 BANDIT |
|
|
| 1998 Suzuki GSF 600 BANDIT |
|
|
| 1999 Suzuki GSF 600 BANDIT |
|
|
| 2000 Suzuki GSF 600 BANDIT |
|
|
| 2001 Suzuki GSF 600 BANDIT |
|
|
| 2002 Suzuki GSF 600 BANDIT |
|
|
| 2004 Suzuki GSF 600 BANDIT |
|
|
| 2005 Suzuki GSF 650 Bandit |
|
|
| 1999 Suzuki SV 650 |
|
WARNING: Will NOT fit SV650S - needs longer brake line |
| 2000 Suzuki SV 650 |
|
WARNING: Will NOT fit SV650S - needs longer brake line |
| 2001 Suzuki SV 650 |
|
WARNING: Will NOT fit SV650S - needs longer brake line |
| 2002 Suzuki SV 650 |
|
WARNING: Will NOT fit SV650S - needs longer brake line |
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: Scott,
My 1998 1200S Bandit has 2 brake lines that run from the master cylinder on the handlebars, 1 to each of the front calipers. There is no "Tee" at the bottom triple clamp, does this mean that your riser kit / brake line will not work on my bike?
Thanks for your help, Russ
|
| ANSWER: Hi Russ,
It sounds like you no longer have the stock brake lines on your Bandit and our brake line will not work. However, the lines you have installed may be loner than stock and you may not need a longer brake line at all. I would check the extra slack in the brake lines at the handlebar. If you have 1 1/2" slack, you should be fine.
Thanks again,
Scott-Genmar |
|
| QUESTION: I have a follow up question, my 1998 1200S Bandit has 2 front brake lines. Does the riser kit installation only require 1 brake line to be replaced or does the kit come with 2 brake lines?
Thanks, Russ |
| ANSWER: Hi Russ,
We only replace the top portion of the brake line from the mastercylinder at the handlebar to the bottom triple-clamp so you will just need the one line.
Thank you,
Scott-Genmar |
|
| QUESTION: Will the installation of these risers on a 1998 1200 Bandit with stock handlebars require any modifications other than the longer brake line supplied with the kit? Thanks, Russ |
| ANSWER: Hi Russ,
The brake line is the only modification you will need to make on the 1998 Bandit.
Thank you,
Scott-Genmar |
|
| QUESTION: Do you have them in stock? Do I need to change my clutch hose?
Thanks
Dave
|
| ANSWER: Hi Dave,
We do have the S-121 risers in stock. You will not have to change the clutch hose.
Thank you,
scott-genmar |
|
| QUESTION: Hi, What cost is postage to Australia post code 7018 for S121 kit for 1200S Suzuki Bandit 2005 model?
thanks, Rob. |
| ANSWER: |
|
| QUESTION: Hi, Just wondering do the handlebar risers for the GSF 1200 Bqaqndit (2005) come as a pair of risers?
Cheers. |
| ANSWER: Hi,
The S-121 risers do come as a complete set of risers with an extended brake hose.
Thank you,
Scott-Genmar |
|
| QUESTION: A previous answer regarding the Bandit 1250 says the S121 risers fit without a new brake line and cost $109.95, but I can only find the price for $135.95. Is that because the price includes the brake line I don't need?
|
| ANSWER: You will not need the brake line on the 1250. We do have a listing for the S-121a risers without the brake line.
Thank you,
Scott-GEnmar |
|
| QUESTION: A previous answer regarding the Bandit 1250 says the S121 risers fit without a new brake line and cost $109.95, but I can only find the price for $135.95. Is that because the price includes the brake line I don't need? |
| ANSWER: |
|
| QUESTION: hi, i would like to buy this item no S121..for my gsr 600 2007,i would like to know will the brake hose fit perfect for my bike as i want to bring my gsr handle bar closer to the tank in order to reach and handle better,i can pay u by paypal and u can ship it to me in new york.Thank You. |
| ANSWER: Hi,
The brake hose is 2" longer than stock to allow the risers to be installed. The hose is a stainless steel braided line made by Galfer Brake Systems and is specifically made for the 600 Bandit. The S-121 risers will bring the bars 1 3/8" closer to you.
Thank you,
Scott-Genmar |
|
| QUESTION: Hi Item #: S121, how much without the brake line? already have a longer one on my bike from different handlebars. also postage to Australia - how much?. can you reply to e-mail addy rakoon@ozemail.com.au
thanks Rick |
| ANSWER: |
|
| QUESTION: I have a 07 sv650 is it less cost because I don't need the longer brake line.
Thanks
Mike |
| ANSWER: Hi Mike,
You will not need the longer brake line on the 07 SV650 which is the difference in cost.
Thank you,
Scott-Genmar |
|
| QUESTION: I want to put the S121 on my bandit 04. Will they come with everyting I need or will I have to change brake line. |
| ANSWER: Hi,
The S-121 risers do come with a longer brake line for the 04 Bandit.
Thank you,
Scott-GenMar |
|
| QUESTION: Hi, do you supply to Brisbane,Queensland,Australia? If so, what is the price in Australian dollars (or would you require us to do the conversion) and what do you charge for freight? |
| ANSWER: |
|
| QUESTION: I need a riser set to attach to the original oem bars of my SV650S. Will this risers work for me?
|
| ANSWER: Hi,
We currently do not offer a riser for the S model. sorry we couldn't help you out.
Thank you,
Scott-GenMar |
|
| QUESTION: I was wanting to purchase the S-121 risers. The application chart shows them fitting a 2001 sv650s but in the Q&A someone is told that they don't fit the 650S model. Which is true? |
| ANSWER: Hi,
We currently do not carry a riser for the SV650S. We only carry risers for the standard model.
Thank you,
Scott-GenMar |
|
| QUESTION: Hi Scott, I'm interested in purchasing the S-121 risers for my Bandit. Can you please confirm if you will deliver to Brisbane, Australia, and if so, what's the postage? Thanks, Mick |
| ANSWER: |
|
| QUESTION: will these work on the 2003 bandit 1200S model as well as the standard model and is the brake line replacement necessary for the 2003 S model? |
| ANSWER: Hi,
The S-121 risers will fit both the Bandit 1200s and the standard model. Both models will need the longer brake hose.
Thank you,
Scott-GenMar |
|
| QUESTION: I am buying an 05 1200 Bandit. Do I have to replace brake line or am I able to install without disconnect? If I do have to disconnect, how do you bleed air out of line?
Thanks
Terry |
| ANSWER: Hi Terry,
You will need the longer brake line on the 05 Bandit. We recommend that a licensed mechanic install the brake line.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: I've got a question regarding the "S121" for my 2000 Suzuki GSF1200S.
The fittings on the ends of the replacement brake hose are much narrower that the stock Suzuki hose fittings. Is this correct? Will this hose work with the stock banjo bolts?
|
| ANSWER: Hi,
The stock fittings are narrower on the Galfer hoses. This is correct and you will be able to use your stock banjo bolts. We have never had any issues with the Galfer hoses in the past.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: I forgot to mention in my last question that the 1250 Bandit has ABS. |
| ANSWER: We have not had a change to install the risers on the ABS model. I will do some checking this weekend and get back with you.
Thank you,
Scott-GenMar |
|
| QUESTION: Do you have a riser for the Suzuki 1250 Bandit? If yes, does the brake hose have to be replaced? What is the cost? Estimated time to install? |
| ANSWER: Hi,
Our S-121 risers do fit the new Bandit 1250. You will not need to change the brake line on the new bandit. However, you do have to remove the brake line from a small bracket on the bottom triple-clamp. It is very simple and does not require disconnecting the brake line. The risers are $109.95 and will take around 15 minutes to install.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Will these work on a 2000 sv650 not the S. |
| ANSWER: Hi,
The S-121 risers will fit on the 2000 SV650. You will need the brake line that comes with the risers. Suzuki used the same brake line on the SV650 as they do on the Bandit models. The brake line is the only modification you will have to make to install the risers.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Hello,
Could you confirm whether the S-121 risers bolt to the existing handlebar with two bolts or just one.
What would be the shipping and delivery to Edmonton Canada, T6J 0X2 ?
Finally, Do you accept Pay-Pal?
Thank You
Rick |
| ANSWER: Hi Rick,
There are two bolts per riser that attach to the existing triple-clamp. Shipping to Canada is $9.00 and usually takes 5-7 days to arrive. We do accept Pay-Pal.
Thank you,
Scott-GenMar |
|
| QUESTION: I have installed heli bars on my 1999 Suzuki Bandit 1200 but would like to combine with risers since I still don't sit comfortably in my Corbin seat. (I'm 5'7"). The cables are already stretched so I may need to find longer ones. Any comments or ideas appreciated in regards to doing this would be appreciated. I also live in Vancouver, BC Canada and while I can arrange for US delivery it is not convenient. Can arrangements be made for delivery to Canada ? thx Manny |
| ANSWER: Hi Manny,
We do ship to Canada daily. We haven't tried the combination of our risers and the Heli set-up here in our shop. I know you will need to have some of the cables lengthened. The risers will bolt on with the Heli handlebars, but I don't know what all is required to make them work. I apologize for not being more helpful.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Hello, I have a 2006 Suzuki GSF650S Bandit but didn't see a listing for a Handlebar Riser set. Do you make a set for my bike and if so, is it in stock.
Thanks, Bev in Dartmouth, NS |
| ANSWER: Hi,
We do carry risers for the 06 Bandit GSF650S. Our S-121 risers will work great just like the previous years.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Hey Scott, customer from OK. Have the brake hoses came in for the bandit 1200 S-121 risers. |
| ANSWER: The hoses came in yesterday afternoon and we are ready to ship the S-121s.
Thank you,
Scott-Genmar |
|
| QUESTION: 02 bandit 1200s 1"up 1 3/8"back how long for shipping if ordered Monday july 24 I need them before Sturgis. shipping is to Oklahoma 73042 |
| ANSWER: Hi,
We are currently back ordered on the brake hoses for the S-121. They are due here the first part of next week. Orders we get before 3pm ship the same day. We ship our orders priority mail which will take 3 days to get to Oklahoma.
Thank you,
Scott-GenMar |
|
| QUESTION: Just bought a 2001 SV650S for my wife. The reach is a little tough for her. The application chart says it will do the SV650S. The pictures in the installation instructions show a standard riser (not a clamp-on below the triple tree). Will this work for the SV650S? |
| ANSWER: Hi,
We currently do not offer a riser that will work on the S model. We currently only carry mirror extenders for the S model. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by