|
| Suzuki Boulevard C90 Handelbar Risers, All Years |
The risers are placed between the fork crown and the handlebars to raise the bars up 1_1/2" (37mm) and back 1" and (25mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.
|
| |
| Item no. S130 |
| Today's Sale Price: $98.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: I am looking to purchase a 2005 C90T however, I am very concerned with the bar height and rear position. I see you have the S130 riser, but I am still wondering about the amount of correction. I an 6 3" and about 425lbs I really think that I would feel better If I did niot have to lean forward at all. Is there any way to replace the complete bar with a more chopped and back style, or higher risers or which bike do you suggest? |
| ANSWER: There are different handlebar bends available for the C90T. However, there is only so much height you can gain without having to change the control cables and hoses. I would try the risers first and if that doesn't solve your comfort issues, you can use a different handlebar in conjunction with our risers.
Thank you,
Scott-Genmar |
|
| QUESTION: Hi just inquiring about the suzuki m50 risers and if you have them out yet thanks Nathan |
| ANSWER: Hi Nathan,
We ran into some issues with the speedo on the M50 and it doesn't look like we will offer risers for the M50.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Hi,
Have you guys found a way around the speedo problem with the M50's? I am interested in your risers.
Thanks! |
| ANSWER: We have looked into the M50 and it doesn't look like we will be able to make risers for it. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: i havethe c90 1500 and i want the handlebars to come back more so i dont have to lean forward what should i use now it hurts the back on rides |
| ANSWER: Hi,
We currently only carry one riser for the C90 which is our S-130 riser. They will raise the bars up 1 1/2" and back 1" while still using your stock control cables. These will sit you up straighter and help with back pain.
Thank you,
Scott-Genmar |
|
| QUESTION: Hi, If I had a way of adapting the speedy on the 2007 M50 will the S-130 fit Thanks Peter |
| ANSWER: Hi,
The S-130 risers will fit the M50 if you relocate the speedo.
Thank you,
scott-genmar |
|
| QUESTION: Hi, will the S-130 riser fit the M50 (2007 model)
Thanks Sharryn |
| ANSWER: Hi,
The S-130 will not fit the M50 only the C50 and C90.
Thank you,
Scott-GenMar |
|
| QUESTION: Hello, I was wondering if you had 1" risers with the same bolt pattern as the M50?
Thank you
Russ |
| ANSWER: Hi Russ,
Our S-130 risers will fit on the M50 except the model with the speedometer attached to the stock risers.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Will these fit an M50, or do you have ones that will????? |
| ANSWER: Hi,
The S-130 risers will not fit the M50. We are working on new risers for the M50 but are running into issues with the speedometer.
Thank you,
Scott-Genmar |
|
| QUESTION: Hello,
It was mentioned that the handlebar risers for the suzuki M50 would
be out in april of 06. Are there any updates on them?? Any information would
be greatly appreciated.
Thank you, shane
|
| ANSWER: Hi Shane,
That is still the plan but no release date is set yet.
Thank you,
Scott-GenMar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by