|
| Suzuki GSX1300 Hayabusa (1999-2007) 19mm handlebar risers |
The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. We recommend rerouting the choke cable to remove cable tension when the handlebars are turned to full right or left.
|
| |
| Item no. S122 |
Retail: $139.95 (PLUS shipping) |
| Today's Sale Price: $137.95 |
|
|
|
|
| Application Chart |
Diagrams |
Application
Notes |
|
| 1999 Suzuki GSX-R 1300 Hayabusa |
|
|
| 2000 Suzuki GSX-R 1300 Hayabusa |
|
|
| 2001 Suzuki GSX-R 1300 Hayabusa |
|
|
| 2002 Suzuki GSX-R 1300 Hayabusa |
|
|
| 2003 Suzuki GSX-R 1300 Hayabusa |
|
|
| 2004 Suzuki GSX-R 1300 Hayabusa |
|
|
| 2005 Suzuki GSX-R 1300 Hayabusa |
|
|
| 2006 Suzuki GSX-R 1300 Hayabusa |
|
|
| 2007 Suzuki GSX-R 1300 Hayabusa |
|
|
|
|
|
|
|
|
|
|
|
|
S122 riser installed on the GSX1300R.
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: thanks scott i will be ordering from you within the next few days.happy holidays mike .ps i have a after market windscreen which only has a inch or so clearance over the clutch an brake fluid holders would you still recommend the s-123 over the s-122 |
| ANSWER: You will still have enough clearance. Most aftermarket windscreens give you more clearance over the stock wind screen.
Thanks again and happy holidays,
Scott-GenMar |
|
| QUESTION: scott how much is shipping after the28th |
| ANSWER: |
|
| QUESTION: hello scott i have a 01 busa i have alot of wrist problems which risers do you recommend also how long does shipping take thx alot mike |
| ANSWER: Hi Mike,
We have the Hayabusa risers in stock and orders usually ship same day. I would recommend the S-123 riser over the S-122 risers if you have wrist problems. The extra height is a big improvement in comfort and does not require any changes to the control cables.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Do you have a choice of colours available and are there any clearence issues with the fairing.
I am looking for a black one the S122.
Thank you.
Bon. |
| ANSWER: Hi Bon,
We currently only carry the S-122 risers in black. There are no clearance issues or cable changes.
Thank you,
Scott-Genmar |
|
| QUESTION: HI will you ship to the U K and how much
Thanks |
| ANSWER: |
|
| QUESTION: I have already purchased a set of heli bars and would like to use 1 of your risers as well. Do you have any experience with this combination? I also have a puig w/s Thanks. |
| ANSWER: Hi,
We have not installed our risers with Helibars here in the shop but we do have some customer feedback. We have been told that you can use our 3/4" risers in conjunction with the Helibars but not our 1 1/4" risers. We have been told that you do not have to make any additional changes to the control cables when adding our risers.
Thank you,
Scott-GenMar |
|
| QUESTION: can you ship to the UK what is the cost |
| ANSWER: |
|
| QUESTION: I am looking for a full 25mm riser to suit a 2006 GXS750F (Katana). I can't find one anywhere, can you recommend where I might find such an animal? |
| ANSWER: Hi,
We haven't heard of any one doing a riser for the Katana 750. You might look into a handlebar conversion kit.
Thank you,
Scott-Genmar |
|
| QUESTION: Can this also be use for lowering the front end? Thank you - Taq |
| ANSWER: Hi,
The fork tubes can be raised into the risers to lower the front end.
Thank you,
Scott-GenMar |
|
| QUESTION: I plan on adding a Zero Gravity sport touring windscreen to my 2006 Suzuki Hayabusa along with one of your riser kits. Would there be clearance issues with the S123? If so,will the S122 fit? Thank you, Bob |
| ANSWER: Hi Bob,
You will not have any clearance issues with either riser. Both risers fit with the stock windscreen and the Zero Gravity windscreen has more clearance than stock.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: How does the S-123 riser affect fork adjustments? From the picture above, it appears the riser requires removal prior to fork adjustments/servicing. |
| ANSWER: You will access the preload adjusters the same way as the stock set-up. The risers slide over the fork tubes and are hollow to let you adjust the suspension the same as stock.
Thank you,
Scott-GenMar |
|
| QUESTION: Could you please be more specific about the choke cable routing? You stated that only the 1999 year requires choke cable re-routing. Is this true for the S-122 and S-123? or just the S-122? |
| ANSWER: Only the 1999 Busa will require that you re-route the choke when using either the S-122 or S-123. All other years do not require any re-routes to the control cables.
Thank you,
Scott-GenMar |
|
| QUESTION: Will this fit the 2006?
|
| ANSWER: Hi,
Our S-122 and S-123 risers will both fit on the 2006 Hayabusa.
Thank you,
Scott-GenMar |
|
| QUESTION: I am thinking about adding braided steel cables for looks for throttle, and front/rear brakes. Will the choke need to be extended or just cleverly re-routed to the bar. Thanks for any help. Warren |
| ANSWER: Hi Warren,
You only need to re-route the choke on the 1999 Busa. All other years do not require the re-route.
Thanks for the inquiry,
Scott-Genmar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by