|
| Suzuki Intruder/Volusia Handlebar Risers, Most Years |
The risers replace the stock 1" tube type handlebar clamp-cap to raise the bars up 1 1/2" (37mm) and back 1" (25mm). This will help to relieve wrist and neck pain on long rides. Require no change in any control cables, wiring, or hoses. Instructions for installing handlebar risers on tube type handlebars.
Fits:
Intruder: Most years with 1 inch diameter handlebars.
Volusia: Most years with 1 inch diameter handlebars.
|
| |
| Item no. S126 |
| Today's Sale Price: $98.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: from the picture , i just don't understand how these things would work....Is there a link that would show how they are used ?? |
| ANSWER: The riser is actually just an insert that goes into your stock riser to give you additional height above what you have now. Our risers do not replace the stock risers.
|
|
| QUESTION: I have a 1991 suzuki vs 750 >> will these work, if not do you have anything that would help me ?? |
| ANSWER:
The S-126 risers will fit the VS750.
|
|
| QUESTION: We have an 2004 VS800 Intruder will these risers work? Thanks Nick |
| ANSWER: Hi,
The S-126 risers will fit the 04 VS800 Intruder.
Thank you,
Scott-GenMar |
|
| QUESTION: will s126 risers work on 2006 suzuki m-50 boulevard ? |
| ANSWER: Hi,
We currently do not offer a riser that will work on the M50. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Hi,will these fit the c1500(European name of the C90)from the year 2007?
Thanks |
| ANSWER: Hi,
The S-130 risers will fit the C1500. The S-126 risers are for a smaller diameter handlebar.
Thank you,
Scott-GenMar |
|
| QUESTION: im looking for risers or risers extensions for 1996 suzuki intruder 800cc 1" bar. does item #S126 fits my bike ? i need risers where wiring will go through. thanks |
| ANSWER: Hi,
The S-126 risers will not fit the 96 Intruder. We currently do not offer a riser that will allow the wriing to go through. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: We have a 1999 800 Intruder and have replaced the bars and wired them externally. Will the s-126 work given these changes? |
| ANSWER: You will be able to use the S-126 risers with your setup.
Thank you,
Scott-Genmar |
|
| QUESTION: Will this product work on a 1999 vs800 intruder ? |
| ANSWER: The S-126 will not work on the 1999 VS800.
Thank you,
Scott-GEnmar |
|
| QUESTION: 1) will the s-126 fit the 2004 suzuki VL intruder 1500 LC
2) when ordering if we order 1 are we ordering a pair. |
| ANSWER: The S-126 risers will fit the 04 Intruder 1500. Quantity 1 is for 1 pair of risers.
Thank you,
Scott-Genmar |
|
| QUESTION: will these fit a 98 suzuki intruder 1400 and is any rewiring required? |
| ANSWER: the s-126 risers will fit the 98 intruder 1400 without any changes to the control cables.
Thank you,
Scott-GenMar |
|
| QUESTION: Will these fir a 2001 Suzuki VL Intruder 1500? |
| ANSWER: The S-126 risers will fit the 01 Intruder 1500.
Thanks for the inquiry,
Scott-GenMar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by seo company