|
| Yamaha Seca II 600 Handlebar Risers - all years |
The risers replace the stock 7/8" tube type handlebar clamp-cap to raise the bars up 3/4" (19mm) and back 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses. Fits Yamahas, and other models, with 7/8" tube type handlebars. Does not fit 1" tube handlebars. |
| |
| Item no. Y121 |
| Today's Sale Price: $110.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: WILL THIS PART#Y121 FIT MY 1996 YAMAHA SECA 2 |
| ANSWER: The Y-121 risers will fit the 96 SECA II without any changes to the control cables.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Will these fit my 2001 FZ1? I need the up & back. |
| ANSWER: The up and back risers will fit the FZ-1 but you will have to change the front brake hose.
Thank you,
Scott-Genmar |
|
| QUESTION: Good morning. Please can I install this parts on my vstrom 650 dl 2007? Thank you.
|
| ANSWER: Hi,
You can put the Y-121 risers on your V-Strom 650.
Thank you,
Scott-Genmar |
|
| QUESTION: I have a 98 WR400 dirtbike,will these work with this application?My concern is strenghth and durability on a dirtbike. Thanks |
| ANSWER: Hi,
The Y-121 risers will fit on your WR400. Several of the local desert racers use the up and back style risers on their race bikes. We haven't had any strength issues to date.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Does this part Y121 fit my 2006 Yamaha FZ6 without any change to the cabling |
| ANSWER: Hi,
The Y-121 will fit on the FZ6 without changing the cables. However,you will have to remove some zip-ties to free up extra slack in the cables.
Thanks for the inquiry,
Scott-Genmar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by