|
| Yamaha YZF-R6 (00-04) Handlebar Risers |
The risers are placed between the fork crown and the handlebars to raise the bars up 3/4" (19mm). This will help to relieve wrist and neck pain on long rides. Requires no change of any control cables, wiring, or hoses.
Fits:
YZF600-R6 2000-2004
S models up to 2008 |
| |
| Item no. Y120 |
| Today's Sale Price: $110.95 |
|
|
|
|
| Application Chart |
Diagrams |
Application
Notes |
|
| 2000 Yamaha YZF R6 |
|
|
| 2001 Yamaha YZF R6 |
|
|
| 2002 Yamaha YZF R6 |
|
|
| 2003 Yamaha YZF R6 |
|
|
| 2004 Yamaha YZF R6 |
|
|
|
|
|
|
|
|
|
|
|
|
Y120 Handlebar risers installed on a Yamaha YZF-R6
 |
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: I have a new 2009 Yamaha R6S on order to be here in January - will the Y120 Handlebar risers work on this? Thanks. |
| ANSWER: Hi,
From what I have seen of the 09 R6S the Y-120 risers will work. We haven't had a chance to confirm it but should know for sure in the next 2-3 weeks.
Thank you,
Scott-Genmar |
|
| QUESTION: will these fit a 2008 yamaha R6 ? |
| ANSWER: The risers will fit the fit the 08 S model but not the standard R6.
Thank you,
Scott-GenMar |
|
| QUESTION: will this product stop the numbness in the hands experienced after only a short while of riding |
| ANSWER: The risers will help substantially by taking weight up off your hands and wrists and take away the feeling that your hands are falling asleep.
Thank you,
Scott-GenMar |
|
| QUESTION: will these fit 2008 yamaha r6 |
| ANSWER: Our Y-120 risers will fit the 08 R6S model with the standard fork and not the R6 with the inverted forks.
Thank you,
Scott-GenMar |
|
| QUESTION: Will these fit a 1999 R6? |
| ANSWER: Hi,
The Y-120 risers will fit the 99 R6.
Thank you,
Scott-GenMar |
|
| QUESTION: hi have you any risers that will fit 2001 yamaha yzf r6 and will i have to change anything thanks clive england |
| ANSWER: Hi,
Our Y-120 risers will fit the 01 R6 without any changes to the control cables.
Thank you,
Scott-Genmar |
|
| QUESTION: Do you have any risers that will fit an 08 Yamaha R6s? |
| ANSWER: Hi,
Our Y-120 risers will fit the R6S with the standard forks but not the R6 with the inverted forks.
Thank you,
Scott-Genmar |
|
| QUESTION: i need handlebar risers for my '01 yam r6. do you have these in stock?
|
| ANSWER: We do have the Y-120 risers in stock.
Thank you,
Scott-GenMar |
|
| QUESTION: I am looking for risers for my 2008 YZF-R6. Does Woodcraft have a clip-on product that will raise my bars 3/4"?
|
| ANSWER: |
|
| QUESTION: I am looking for risers for my 2008 YZF-R6. Does Woodcraft have a clip-on product that will raise my bars 3/4"?
|
| ANSWER: |
|
| QUESTION: Any reason why you are not planning on making risers for the 2005 R6? thanks |
| ANSWER: Hi,
When yamaha went to the inverted forks on the 05 R6, it changed the way our risers mount to the bike. We have tried various applications and haven't been convinced with the safety of either design and have decided not to continue development.
Sorry we couldn't help you out,
Scott-genMar |
|
| QUESTION: How much of a difference does it make on your wrists when you are riding? Am I better off getting new raised handlebars than risers? |
| ANSWER: If you sit on the bike the way it sits now and make your hands into a fist and rest them on the grips where they start to roll back toward you, this is close to the comfort you will get with the risers installed on the R6.
Thank you,
Scott-GenMar |
|
| QUESTION: In most of the question/answers they were about R6's. I have an '06 R6S. I don't know anything about the inverted forks so maybe you can clarify this for me? Do you have any risers for my bike or do you know who does? |
| ANSWER: Hi,
We do carry risers for the R6S with the standard forks. Our Y-120 risers will fit your bike without any changes to the control cables. It is only the R6 with the inverted forks that our risers will not work on.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: I was just wondering if you this item
Item no. Y120 in stock?? Also would you ship the item USPS to Canada???
|
| ANSWER: Hi,
We are currently back ordered on the Y-120 risers until late next week. We would be happy to ship to Canada via USPS.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: What risers fit the 2007 R1 or the 2007 CBR600RR? |
| ANSWER: Hi,
We currently do not offer a riser for either bike. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Do the Y120 risers fit the 07 Yamaha R6S? It doesn't use the inverted fork. I have been told the bike is similar to the 04 R6. Thank you, Richard |
| ANSWER: Hi Richard,
The Y-120s will fit on the S model.
Thank you,
Scott-GenMar |
|
| QUESTION: Do you do risers for a Yami R6 2001 cheers Neil in the uk |
| ANSWER: Hi Neil,
Our Y-120 risers will fit the 2001 Yamaha R6.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Hi, do you do any risers for a 2006 Yamaha R1 that would keep it looking as "standard" as possible ?
Thanks Carl |
| ANSWER: Hi Carl,
We currently do not carry risers for the R1. Sorry we couldn't help you out.
Thank you,
Scott-GenMar |
|
| QUESTION: Do oyu so these for a 2003 Model R1 ? & what cost to ship to the UK.
Thank s
Nick |
| ANSWER: Hi,
We currently do not offer a riser for the R1. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Will these fit on the new Yamaha 2006 R6? Thanks |
| ANSWER: Hi,
Our Y-120 risers will only fit up to the 04 R6. Yamaha went to inverted forks on the R6 in 05 and our risers will not longer work. Because of the inverted forks, we don't have plans to make risers for the new R6s. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Hi , just wondering how much to ship these to Canada postal code N3C 3M4 . (Item no. Y120 )
Thanks for your time
Walter Pereira
|
| ANSWER: Hi Walter,
Shipping to Canada is $7.50 for global priority which usually takes 5-7 days to arrive.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Hi, I was looking for this for a long time and now I found it.I have R6 2003.
Can you deliver to the Croatia (Europe) and how much that will cost?
Where can I order it and how do I pay for them? Thanks |
| ANSWER: Hi,
We so ship to Europe daily. The Y-120 risers are $109.95 plus $9.00 for shipping. Our international orders are shipped via global priority which usually takes around 7 days to arrive. Orders can be placed at this web site or at www.genmarmfg.com .
Thank you,
Scott-Genmar |
|
| QUESTION: Will this fit the 04 r6? |
| ANSWER: Hi,
The risers will fit on the 04 R6. No changes to the control cables are necessary.
Thank you,
Scott-GenMar |
|
| QUESTION: do these fit 2005 r6 |
| ANSWER: Hi,
The Y-120s will not fit on the 05 R6. We currently do not have an application for the 05s. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-Genmar |
|
| QUESTION: Do you make one for a 2005 yamaha r1? if so is 3/4 the highest. |
| ANSWER: Hi,
We currently do not make a riser for the R1. Sorry we couldn't help you out.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: I would like to buy these for my Girlfriends 03 Yamaha R6.
Does the fork tubes need to be moved up in the triple trees for this riser peice to clamp on to the for tube.
Also, do the riser peices obstruct the access of the fork pre load adjusters (flat head screw on top of the fork tube)?
Thanks
Nick |
| ANSWER: Hi Nick,
You will not have to raise the fork tubes on the 03 R6 to get sufficient clamping surface. The tube inside of the riser is hollow to allow you access to the pre load adjusters. The hole is covered up with a snap plug that just pops on and off to allow access.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Hi,
I am in England an was interested in the risers for my 2000 R6.
Do you only have this version of riser? I've also seen ones that allow you to change pitch and angle of the bars as well as rise the bars up to 3" up.
Can you deliver to the UK and how much?
What deal can you offer me on the risers you do offer?
Thanks
Mem
London |
| ANSWER: Hi,
Our Y-120 risers will fit on the 2000 R6. We currently only carry one version. We do ship to the UK daily and the additional shipping costs are $9.00 for global priority. The current price for the risers is listed on the web site. We do have the Y-120s in stock and ship same day.
Thanks for the inquiry,
Scott-GenMar |
|
| QUESTION: Does the tube that comes with the riser have a bigger diameter than the fork tube of the R6? How strong will it be or is there a possibility that it will loosen up while riding the bike?
Do you accept orders outside the U.S.? Like in Asia specifically in the Philippines? |
| ANSWER: The tube inside the riser is the same size as the R6 fork tubes. When the risers are installed properly, they are just a strong as stock. We do accept international orders.
Thank you,
Scott-Genmar |
|
| QUESTION: Will these fit a '99 r1? i don't see any risers listed for the r1. please point me to ones that fit if you have them. thanks. |
| ANSWER: Hi,
We currently do not have a riser available for the R1. Your best bet would be
To check with Helibars or Two Brothers Racing. Sorry we couldn't help you
out.
Thank you,
Scott-GenMar |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by